Impellers & Shafts
Product FiltersShowing 1–12 of 40 results
Propeller & Shaft
Model A190
- 25 mm (1 in) dia
- 400 mm (16 in) shaft
- Axial flow
Axial flow impeller effective for low shear mixing. Stainless steel blade secured to an 8 mm (⁵⁄₁₆ in) diameter shaft with set screws.
Propeller & Shaft
Model A166
- 64 mm (2 ½ in) dia
- 400 mm (16 in) shaft
- Axial flow
A popular choice for high speed, low viscosity stirring in wide range of applications. Stainless steel blade secured to an 8 mm (⁵⁄₁₆ in) diameter shaft with set screws.
Square Blade
Model A250
- 38 mm (1 ½ in) square
- 400 mm (16 in) shaft
- Tangential flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, high viscosity mixing of small volumes.
Square Blade
Model A150
- 71 mm (2 ¾ in) square
- 452 mm (17 13⁄₁₆ in) shaft
- Tangential flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, high viscosity mixing of small volumes.
Collapsible Blade
Model A141
- 10-90 mm (⅜ – 3 ½ in) dia
- 400 mm (16 in) shaft
- Radial flow
For narrow neck vessels. Blades are pinned to an 8 mm (⁵⁄₁₆ in) diameter shaft, fanning out with agitation. For high speed, low viscosity mixing. High shear and moderate vortexing properties.
Pivoting Blade
Model A140
- 60 mm (2 ⅜ in) dia
- 400 mm (16 in) shaft
- Radial flow
Straight blade is pinned to 8 mm (⁵⁄₁₆ in) diameter shaft, allowing it to pivot during agitation. For high speed, low viscosity mixing. Moderate shear and moderate vortexing properties.
Crossed Blade
Model A130
- 50 mm (2 in) dia
- 400 mm (16 in) shaft
- Radial flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For high speed, high shear, low viscosity mixing. High vortexing properties.
Straight Blade
Model A131
- 50 mm (2 in) dia
- 400 mm (16 in) shaft
- Radial flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.
Straight Blade
Model A231
- 32 mm (1 ¼ in) dia
- 400 mm (16 in) shaft
- Radial flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.
Straight Blade Only
Model A163
- 40 mm (1 ⁹⁄₁₆ in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Radial flow
Electropolished 316L stainless steel. For high shear, low viscosity mixing with moderate vortexing.
Dispersion Blade Only
Model A164
- 48 mm (1 ⅞ in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Radial flow
Electropolished 316 stainless steel. For high shear mixing at medium to high speeds.
Dispersion Blade Only
Model A431
- 75 mm (3 in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Radial flow
Electropolished 316 stainless steel. For high shear mixing at medium to high speeds.
