Axial Flow
Product FiltersShowing all 10 results
Propeller & Shaft
Model A190
- 25 mm (1 in) dia
- 400 mm (16 in) shaft
- Axial flow
Axial flow impeller effective for low shear mixing. Stainless steel blade secured to an 8 mm (⁵⁄₁₆ in) diameter shaft with set screws.
Propeller & Shaft
Model A166
- 64 mm (2 ½ in) dia
- 400 mm (16 in) shaft
- Axial flow
A popular choice for high speed, low viscosity stirring in wide range of applications. Stainless steel blade secured to an 8 mm (⁵⁄₁₆ in) diameter shaft with set screws.
Pitched Blade Only
Model A165
- 64 mm (2 ½ in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L cast stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection. This product replaces the Pitched Blade Propeller Model A161.
Pitched Blade Only
Model A511
- 25 mm (1 in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.
Pitched Blade Only
Model A521
- 38 mm (1 ½ in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.
Pitched Blade Only
Model A531
- 50 mm (2 in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.
Pitched Blade Only
Model A533
- 50 mm (2 in) dia
- 9.5 mm (⅜ in) bore
- Axial flow
Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.
Pitched Blade Only
Model A541
- 78 mm (3 in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.
4 Blade Pitched Only
Model A561
- 100 mm (4 in) dia
- 8 mm (⁵⁄₁₆ in) bore
- Axial flow
Electropolished 316L stainless steel. For moderate shear and moderate viscosity mixing.
PTFE 4 Blade Pitched
Model A185
- 40 mm (1 ⁹⁄₁₆ in) dia
- 400 mm (16 in) shaft
- Axial flow
Right hand rotation PTFE impeller with 45° pitched blades. Attached to coated 8 mm (⁵⁄₁₆ in) diameter shaft. For high speed, low viscosity mixing.
