Tangential Flow
Product FiltersShowing all 8 results
Square Blade
Model A250
- 38 mm (1 ½ in) square
- 400 mm (16 in) shaft
- Tangential flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, high viscosity mixing of small volumes.
Square Blade
Model A150
- 71 mm (2 ¾ in) square
- 452 mm (17 13⁄₁₆ in) shaft
- Tangential flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, high viscosity mixing of small volumes.
PTFE Anchor Paddle
Model A183
- 80 mm (3 ⅛ in) dia
- 400 mm (16 in) shaft
- Tangential flow
PTFE blade attached to coated 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, higher viscosity mixing, ideal for round bottom flasks.
Anchor Paddle
Model U022
- 51 x 51 mm (2 x 2 in)
- 400 mm (16 in) shaft
- Tangential flow
Stainless steel blade welded to 8 mm (⁵⁄₁₆ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
Anchor Paddle
Model U044
- 102 x 102 mm (4 x 4 in)
- 914 mm (36 in) shaft
- Tangential flow
Stainless steel blade welded to 9.5 mm (⅜ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
Anchor & Sweep
Model U044SW
- 152 x 145 mm (6 x 5 ¾ in)
- 914 mm (36 in) shaft
- Tangential flow
U044 anchor paddle with two Sweep accessories. For low speed, high viscosity mixing, sweeping product effectively off standard 4 L beaker wall.
Anchor Paddle
Model U055
- 127 x 127 mm (5 x 5 in)
- 914 mm (36 in) shaft
- Tangential flow
Stainless steel blade welded to 9.5 mm (⅜ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
Anchor Paddle
Model U510
- 127 x 254 mm (5 x 10 in)
- 914 mm (36 in) shaft
- Tangential flow
Stainless steel blade welded to 9.5 mm (⅜ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
