Products
Product FiltersShowing 49–60 of 72 results
-
Anchor & Sweep
Model U044SW
- 152 x 145 mm (6 x 5 ¾ in)
- 914 mm (36 in) shaft
- Tangential flow
U044 anchor paddle with two Sweep accessories. For low speed, high viscosity mixing, sweeping product effectively off standard 4 L beaker wall.
-
Anchor Paddle
Model U055
- 127 x 127 mm (5 x 5 in)
- 914 mm (36 in) shaft
- Tangential flow
Stainless steel blade welded to 9.5 mm (⅜ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
-
Anchor Paddle
Model U510
- 127 x 254 mm (5 x 10 in)
- 914 mm (36 in) shaft
- Tangential flow
Stainless steel blade welded to 9.5 mm (⅜ in) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.
-
High Speed Collet Set
Model A600SET
- 1800-6000 rpm
- Stainless steel
- Fits 13 mm (½ in) output shaft
Achieve greater stability in stirring at higher speeds. Set includes collet, shaft, and three impeller blades.
-
Propeller & Shaft
Model A354
- 102 mm (4 in) dia
- 914 mm (36 in) shaft
- Axial flow
Pitched propeller made of 316L stainless steel, polished and buffed to mirror finish. 13 mm (½ in) diameter shaft is welded to hub. For pilot scale and small production volume mixing. Axial flow effective for low shear mixing.
-
Propeller & Shaft
Model A356
- 152 mm (6 in) dia
- 914 mm (36 in) shaft
- Axial flow
Pitched propeller made of 316L stainless steel, polished and buffed to mirror finish. 13 mm (½ in) diameter shaft is welded to hub. For pilot scale and small production volume mixing. Axial flow effective for low shear mixing.
-
BDC250 Impeller Set
Model S100
- 188 x 6.0 mm shaft (7 ⅜ x 0.24 in)
- 13 x 30 mm blade (½ x 1 3⁄₁₆ in)
- 316L stainless steel
Shaft and blades for BDC250 stirrer. Includes shaft, two blades (axial and radial) and set screw.
-
Shaft 305 mm (12 in)
Model A712
- 8 mm (⁵⁄₁₆ in) dia
- 305 mm (12 in) length
- 316L stainless steel
Passivated stainless steel shaft for impeller blades with 8 mm (⁵⁄₁₆ in) diameter bore. Excellent corrosion resistance.
-
Shaft 305 mm (12 in)
Model A713
- 9.5 mm (⅜ in) dia
- 305 mm (12 in) length
- 316L stainless steel
Passivated stainless steel shaft for blades with bores of either 8 mm (⁵⁄₁₆ in) or 9.5 mm (⅜ in) diameter. Excellent corrosion resistance.
-
Shaft 406 mm (16 in)
Model A162
- 8 mm (⁵⁄₁₆ in) dia
- 406 mm (16 in) length
- 316L stainless steel
Passivated stainless steel shaft for impeller blades with 8 mm (⁵⁄₁₆ in) diameter bore. Excellent corrosion resistance.
-
Shaft 457 mm (18 in)
Model A722
- 8 mm (⁵⁄₁₆ in) dia
- 457 mm (18 in) length
- 316L stainless steel
Passivated stainless steel shaft for impeller blades with 8 mm (⁵⁄₁₆ in) diameter bore. Excellent corrosion resistance.
-
Shaft 457 mm (18 in)
Model A723
- 9.5 mm (⅜ in) dia
- 457 mm (18 in) length
- 316L stainless steel
Passivated stainless steel shaft for blades with bores of either 8 mm (⁵⁄₁₆ in) or 9.5 mm (⅜ in) diameter. Excellent corrosion resistance.
