1-800-567-3556 ext. 248

Ultra Speed

Model BDC6015

BDC6015, Ultra Speed
  • BDC6015, Ultra Speed
  • High Torque Stirrers - Full body
  • High torque dimensional drawing
  • reactor
  • Dispersion of Ceramic Powders

Ultra Speed

Model BDC6015

Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high-performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo stirrers are quiet, dependable, maintenance free and ideal for continuous use. Included in each purchase: Overhead stirrer motor, chuck, chuck guard, chuck key, support rod, power cord, manual in four languages (English, French, Spanish and German), calibration certificate and three year warranty. Expect to be impressed!


Speed 40-6000 rpm
Volume Maximum 25 L (6.5 US Gallons)
Viscosity Maximum 20 000 mPa·s (20 000 cP)
Torque Maximum 170 Ncm (15 in-lbs = 240 in-oz)
Output Power 150 Watts (⅕ hp)
Speed Display Yes
Speed - Low Range 40-1200 rpm
Speed - High Range 1200-6000 rpm
Speed Accuracy +/- 1 rpm
Torque Display Yes
Torque Maximum - Low Speed 170 Ncm (15 in-lbs = 240 in-oz)
Torque Maximum - High Speed 34 Ncm (3 in-lbs = 48 in-oz)
Torque Accuracy +/- 12 Ncm (+/- 1 in-lb)
Zero Torque Yes
Timer No
Through Shaft Yes
Chuck Maximum Shaft Diameter 10 mm (⅜”)
Chuck Guard Yes
Rotation Direction Clockwise only
Housing Cast aluminum
Weight 5 kg (11 lb)
Voltage 120 volt/230 volt
Frequency 50/60 Hz
Ambient Temperature Operation 5-40°C (41-104°F)
Relative Humidity Operation 80%
Approvals CSA listed to Canada and US standards
Warranty 3 years
BDC6015

Overhead stirrer motor 120 volts, 60 Hz. Includes support rod, chuck, chuck key, chuck guard, grounded North American power cord, and printed manual.

BDC6015220U1

Overhead stirrer motor 220-240 volts, 50/60 Hz. Includes support rod, chuck, chuck key, chuck guard, UK and EU cord sets, and printed manual.

BDC6015220AU

Overhead stirrer motor 220-240 volts, 50/60 Hz. Includes support rod, chuck, chuck key, chuck guard, Australia cord set, and printed manual.

Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Features
    • Brushless DC motor
    • Totally enclosed metal housing
    • Electronic control
    • Smart two-speed transmission
    • Through shaft
    • Chuck guard included
  • Benefits
    • High efficiency (less heat)
    • Protection from dust and product splashing
    • Precise speed adjustment and speed maintenance as viscosity changes
    • Transmission selects high-torque or high-speed range
    • Easy impeller adjustment saves time
    • Safely encloses spinning chuck to protect user
    • Protects chuck from splashes
  • A110

    Safety Stand

    Model A110

    • 710 mm (28”) stand rod
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Cast zinc-aluminum alloy

     

    Wide base and H configuration stability for bench top stirrers, including high torque line. Chemical resistant coating. Additional stand rod lengths, all 25 mm (1″) diameter, are available.

    Compare
  • A112

    System Stand

    Model A112

    • 710 mm (28”) stand rod
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Two threaded holes for A300 support rods

     

    Able to support additional apparatus on secondary rods. Chemical-resistant coated cast zinc-aluminum alloy base. Diameter of the central rod is 25 mm (1”).

    Compare
  • A113

    System Stand

    Model A113

    • 960 mm (38”) stand rod
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Two threaded holes for A300 support rods

     

    Supports additional apparatus on secondary rods. Chemical-resistant coated cast zinc-aluminum alloy base. Central rod diameter is 25 mm (1”).

    Compare
  • A114

    System Stand

    Model A114

    • 1200 mm (48”) stand rod
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Two threaded holes for A300 support rods

     

    Supports additional apparatus on secondary rods. Chemical-resistant coated cast zinc-aluminum alloy base. Central rod diameter is 25 mm (1”).

    Compare
  • A110BASE

    Safety Stand Base

    Model A110BASE

    • Base only
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Cast zinc-aluminum alloy

     

    Wide base and H configuration provide excellent stability for bench top stirrers, including high torque line. Chemical resistant coating.

    Compare
  • ROD28

    Stand Rod

    Model ROD28

    • 710 mm (28″) length
    • 25 mm (1″) diameter
    • 304 stainless steel

     

    Stand rod only.  Compatible with A110 stand base. Customize A113 or A114 stand with 710 mm (28″) stand rod.

    Compare
  • ROD38

    Stand Rod

    Model ROD38

    • 960 mm (38″) length
    • 25 mm (1″) diameter
    • 304 stainless steel

     

    Stand rod only.  Compatible with A110 stand base. Customize A112 or A114 stand with 960 mm (38″) stand rod.

    Compare
  • ROD48

    Stand Rod

    Model ROD48

    • 1200 mm (48″) length
    • 25 mm (1″) diameter
    • 304 stainless steel

     

    Stand rod only.  Compatible with A110 stand base. Customize A112 or A113 stand with 1200 mm (48″) stand rod.

    Compare
  • Compare
  • A120_only

    Fastening Clamp

    Model A120

    • 12.5 mm (½”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp for its durability and ease of use. Coated for protection from corrosion and chemical spills.

    Compare
  • A122_only

    Fastening Clamp

    Model A122

    • 16 mm (⅝”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp designed to accommodate stirrer support rods up to 16 mm (⅝”) diameter. Coated for protection from corrosion and chemical spills.

    Compare
  • A190

    Propeller & Shaft

    Model A190

    • 25 mm (1”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    Axial flow impeller effective for low shear mixing. Stainless steel blade secured to an 8 mm (5/16”) diameter shaft with set screws.

    Compare
  • A166

    Propeller & Shaft

    Model A166

    • 65 mm (2 ½”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    A popular choice for high speed, low viscosity stirring in wide range of applications. Stainless steel blade secured to an 8 mm (5/16”) diameter shaft with set screws.

    Compare
  • A130

    Crossed Blade

    Model A130

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. High vortexing properties.

    Compare
  • A231

    Straight Blade

    Model A231

    • 30 mm (1 ¼”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.

    Compare
  • A131

    Straight Blade

    Model A131

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.

    Compare
  • A250

    Square Blade

    Model A250

    • 38 mm (1 ½”) square
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing of small volumes.

    Compare
  • A150

    Square Blade

    Model A150

    • 70 mm (2 ¾”) square
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing of small volumes.

    Compare
  • A140

    Pivoting Blade

    Model A140

    • 60 mm (2 ⅜”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Straight blade is pinned to 8 mm (5/16”) diameter shaft, allowing it to pivot during agitation. For high speed, low viscosity mixing. Moderate shear and moderate vortexing properties.

    Compare
  • A141

    Collapsible Blade

    Model A141

    • 10-90 mm (⅜” – 3 ½”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    For narrow neck vessels. Blades are pinned to an 8 mm (5/16”) diameter shaft, fanning out with agitation. For high speed, low viscosity mixing. High shear and moderate vortexing properties.

    Compare
  • U022

    Anchor Paddle

    Model U022

    • 50 x 50 mm (2″ x 2”)
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.

    Compare
  • U044

    Anchor Paddle

    Model U044

    • 102 x 102 mm (4″ x 4″)
    • 914 mm (36”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 9.5 mm (⅜”) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.

    Compare
  • A183

    PTFE Anchor Paddle

    Model A183

    • 80 mm (3 ⅛”) Ø
    • 400 mm (16”) shaft
    • Tangential flow

     

    PTFE blade attached to coated 8 mm (5/16”) diameter shaft. For low speed, higher viscosity mixing, ideal for round bottom flasks.

    Compare
  • A185

    PTFE 4 Blade Pitched

    Model A185

    • 40 mm (1 ½”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    Right hand rotation PTFE impeller with 45° pitched blades. Attached to coated 8 mm (5/16”) diameter shaft. For high speed, low viscosity mixing.

     

    Compare
  • A180

    PTFE Collapsible

    Model A180

    • 40 mm (1 ½”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    PTFE impeller for narrow neck vessels. PTFE blades attached to coated 8 mm (5/16”) diameter shaft. For high speed, low viscosity mixing

    Compare
  • A165

    Pitched Blade Only

    Model A165

    • 65 mm (2 ½”) Ø
    • 8 mm (5/16”) bore
    • Axial flow

     

    Electropolished 316L cast stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection. This product replaces the Pitched Blade Propeller Model A161.

    Compare
  • Compare
  • A521

    Pitched Blade Only

    Model A521

    • 38 mm (1 ½”) Ø
    • 8 mm (5/16”) bore
    • Axial flow

     

    Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.

    Compare
  • Compare
  • Compare
  • Compare
  • Compare
  • Compare
  • Compare
  • Compare
  • A712

    Shaft 300 mm (12″)

    Model A712

    • 8 mm (5/16”) Ø
    • 300 mm (12″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A713

    Shaft 300 mm (12″)

    Model A713

    • 9.5 mm (⅜”) Ø
    • 300 mm (12”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A162

    Shaft 400 mm (16″)

    Model A162

    • 8 mm (5/16”) Ø
    • 400 mm (16″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A722

    Shaft 460 mm (18″)

    Model A722

    • 8 mm (5/16”) Ø
    • 460 mm (18″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm 5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A723

    Shaft 460 mm (18″)

    Model A723

    • 9.5 mm (⅜”) Ø
    • 460 mm (18″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A733

    Shaft 500 mm (20″)

    Model A733

    • 9.5 mm (⅜”) Ø
    • 500 mm (20”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A742

    Shaft 600 mm (24″)

    Model A742

    • 8 mm (5/16”) Ø
    • 600 mm (24″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A743

    Shaft 600 mm (24″)

    Model A743

    • 9.5 mm (⅜”) Ø
    • 600 mm (24”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A753

    Shaft 760 mm (30″)

    Model A753

    • 9.5 mm (⅜”) Ø
    • 760 mm (30″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare

You may also like…

  • A110

    Safety Stand

    Model A110

    • 710 mm (28”) stand rod
    • 430 x 415 mm footprint (17” x 16 ⅜”)
    • Cast zinc-aluminum alloy

     

    Wide base and H configuration stability for bench top stirrers, including high torque line. Chemical resistant coating. Additional stand rod lengths, all 25 mm (1″) diameter, are available.

    Compare
  • A120_only

    Fastening Clamp

    Model A120

    • 12.5 mm (½”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp for its durability and ease of use. Coated for protection from corrosion and chemical spills.

    Compare
  • A130

    Crossed Blade

    Model A130

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. High vortexing properties.

    Compare
  • A collection of our most popular products.

    We know your time is precious, so we have collected a list of our most popular products to get you started.

  • Delivering safe, reliable products since 1955.

    We are proud of the products we make and are confident you will love them too.

  • News

    Find out whats going on at Caframo, events we will be attending and much much more.

  • Service & Support

    Find all the help you need for your Caframo Lab Solutions products.

  • Find a Distributor

    Discover where you can buy Caframo Lab Solutions products.