1-800-567-3556 ext. 248

Compact Digital

Model BDC2002

BDC2002
  • BDC2002
  • Polymer Solution Formulation
  • 2002_ dimensional drawing

Compact Digital

Model BDC2002

Caframo’s BDC2002 offers ultimate versatility and maximizes productivity. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded power cord, manual in four languages (English, French, Spanish and German) and three year warranty.


Speed 40-2002 rpm
Volume Maximum 25 L (6.5 US Gallons)
Viscosity Maximum 15 000 mPa·s (15 000 cP)
Torque Maximum 70 Ncm (6 in-lbs = 100 in-oz)
Output Power 40 Watts (1/18 hp)
Speed Display Yes
Speed Accuracy +/- 1 rpm
Torque Display No
Zero Torque No
Timer No
Through Shaft Yes
Chuck Maximum Shaft Diameter 10 mm (⅜”)
Chuck Guard Available
Rotation Direction Clockwise only
Housing Epoxy-coated zinc
Weight Power Supply: 0.5 kg (1 lb), Stirrer: 3.0 kg (7 lb)
IP Rating IP42
Voltage 120 volt/230 volt
Frequency 50/60 Hz
Ambient Temperature Operation 5-40°C (41-104°F)
Relative Humidity Operation 80%
Approvals CSA listed to Canada and US standards
Warranty 3 years
BDC2002

Overhead stirrer motor 120-240 volts, 50/60 Hz. Includes support rod, chuck, chuck key, external power supply, grounded North American power cord, and printed manual.

BDC2002U1

Overhead stirrer motor 220-240 volts, 50/60 Hz. Includes support rod, chuck, chuck key, external power supply, UK and EU cord sets, and printed manual.

BDC2002AU

Overhead stirrer motor 220-240 volts, 50/60 Hz. Includes support rod, chuck, chuck key, external power supply, Australia cord set. and printed manual.

Remember to order a stand, clamp and impeller for a complete system to start mixing.

  • Features
    • Stirlight™
    • Sealed housing
    • Brushless DC motor
    • Digital display
    • Through shaft
    • Electronic digital control
  • Benefits
    • Allows monitoring of mixing properties of batches
    • Keeps liquids and moisture out in aggressive environments
    • High efficiency (less heat)
    • Precise speed adjustment
    • Easy impeller adjustment saves time
    • Set speed is maintained as viscosity changes
    • Automatic overload protection
  • A210

    Compact Stand

    Model A210

    • 610 mm (24″) stand rod
    • 240 x 300 mm footprint (9 ½” x 11 ⅞”)
    • Unique offset design

     

    Robust stand in a smaller bench footprint for compact stirrers BDC2002 and BDC2010.  Chemical-resistant coated cast zinc-aluminum alloy base.

    Compare
  • A120_only

    Fastening Clamp

    Model A120

    • 12.5 mm (½”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp for its durability and ease of use. Coated for protection from corrosion and chemical spills.

    Compare
  • A122_only

    Fastening Clamp

    Model A122

    • 16 mm (⅝”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp designed to accommodate stirrer support rods up to 16 mm (⅝”) diameter. Coated for protection from corrosion and chemical spills.

    Compare
  • A190

    Propeller & Shaft

    Model A190

    • 25 mm (1”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    Axial flow impeller effective for low shear mixing. Stainless steel blade secured to an 8 mm (5/16”) diameter shaft with set screws.

    Compare
  • A166

    Propeller & Shaft

    Model A166

    • 65 mm (2 ½”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    A popular choice for high speed, low viscosity stirring in wide range of applications. Stainless steel blade secured to an 8 mm (5/16”) diameter shaft with set screws.

    Compare
  • A130

    Crossed Blade

    Model A130

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. High vortexing properties.

    Compare
  • A231

    Straight Blade

    Model A231

    • 30 mm (1 ¼”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.

    Compare
  • A131

    Straight Blade

    Model A131

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.

    Compare
  • A250

    Square Blade

    Model A250

    • 38 mm (1 ½”) square
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing of small volumes.

    Compare
  • A150

    Square Blade

    Model A150

    • 70 mm (2 ¾”) square
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing of small volumes.

    Compare
  • A141

    Collapsible Blade

    Model A141

    • 10-90 mm (⅜” – 3 ½”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    For narrow neck vessels. Blades are pinned to an 8 mm (5/16”) diameter shaft, fanning out with agitation. For high speed, low viscosity mixing. High shear and moderate vortexing properties.

    Compare
  • A140

    Pivoting Blade

    Model A140

    • 60 mm (2 ⅜”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Straight blade is pinned to 8 mm (5/16”) diameter shaft, allowing it to pivot during agitation. For high speed, low viscosity mixing. Moderate shear and moderate vortexing properties.

    Compare
  • A180

    PTFE Collapsible

    Model A180

    • 40 mm (1 ½”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    PTFE impeller for narrow neck vessels. PTFE blades attached to coated 8 mm (5/16”) diameter shaft. For high speed, low viscosity mixing

    Compare
  • A183

    PTFE Anchor Paddle

    Model A183

    • 80 mm (3 ⅛”) Ø
    • 400 mm (16”) shaft
    • Tangential flow

     

    PTFE blade attached to coated 8 mm (5/16”) diameter shaft. For low speed, higher viscosity mixing, ideal for round bottom flasks.

    Compare
  • A185

    PTFE 4 Blade Pitched

    Model A185

    • 40 mm (1 ½”) Ø
    • 400 mm (16”) shaft
    • Axial flow

     

    Right hand rotation PTFE impeller with 45° pitched blades. Attached to coated 8 mm (5/16”) diameter shaft. For high speed, low viscosity mixing.

     

    Compare
  • U022

    Anchor Paddle

    Model U022

    • 50 x 50 mm (2″ x 2”)
    • 400 mm (16”) shaft
    • Tangential flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For low speed, high viscosity mixing and can be used close to vessel wall.

    Compare
  • Compare
  • Compare
  • Compare
  • Compare
  • A165

    Pitched Blade Only

    Model A165

    • 65 mm (2 ½”) Ø
    • 8 mm (5/16”) bore
    • Axial flow

     

    Electropolished 316L cast stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection. This product replaces the Pitched Blade Propeller Model A161.

    Compare
  • Compare
  • A521

    Pitched Blade Only

    Model A521

    • 38 mm (1 ½”) Ø
    • 8 mm (5/16”) bore
    • Axial flow

     

    Electropolished 316L stainless steel. For low shear, high top-to-bottom pumping capacity with high gas injection.

    Compare
  • Compare
  • Compare
  • Compare
  • A162

    Shaft 400 mm (16″)

    Model A162

    • 8 mm (5/16”) Ø
    • 400 mm (16″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A722

    Shaft 460 mm (18″)

    Model A722

    • 8 mm (5/16”) Ø
    • 460 mm (18″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm 5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A723

    Shaft 460 mm (18″)

    Model A723

    • 9.5 mm (⅜”) Ø
    • 460 mm (18″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A733

    Shaft 500 mm (20″)

    Model A733

    • 9.5 mm (⅜”) Ø
    • 500 mm (20”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A742

    Shaft 600 mm (24″)

    Model A742

    • 8 mm (5/16”) Ø
    • 600 mm (24″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare
  • A743

    Shaft 600 mm (24″)

    Model A743

    • 9.5 mm (⅜”) Ø
    • 600 mm (24”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A753

    Shaft 760 mm (30″)

    Model A753

    • 9.5 mm (⅜”) Ø
    • 760 mm (30″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A713

    Shaft 300 mm (12″)

    Model A713

    • 9.5 mm (⅜”) Ø
    • 300 mm (12”) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for blades with bores of either 8 mm (5/16″) or 9.5 mm (⅜”) diameter. Excellent corrosion resistance.

    Compare
  • A712

    Shaft 300 mm (12″)

    Model A712

    • 8 mm (5/16”) Ø
    • 300 mm (12″) length
    • 316L stainless steel

     

    Passivated stainless steel shaft for impeller blades with 8 mm (5/16”) diameter bore.  Excellent corrosion resistance.

     

    Compare

You may also like…

  • A210

    Compact Stand

    Model A210

    • 610 mm (24″) stand rod
    • 240 x 300 mm footprint (9 ½” x 11 ⅞”)
    • Unique offset design

     

    Robust stand in a smaller bench footprint for compact stirrers BDC2002 and BDC2010.  Chemical-resistant coated cast zinc-aluminum alloy base.

    Compare
  • A120_only

    Fastening Clamp

    Model A120

    • 12.5 mm (½”) stirrer support rod capacity
    • 15-30 mm stand rod (9/16” – 1 3/16”)
    • Cast zinc-aluminum alloy

     

    Popular clamp for its durability and ease of use. Coated for protection from corrosion and chemical spills.

    Compare
  • A131

    Straight Blade

    Model A131

    • 50 mm (2”) Ø
    • 400 mm (16”) shaft
    • Radial flow

     

    Stainless steel blade welded to 8 mm (5/16”) diameter shaft. For high speed, high shear, low viscosity mixing. Moderate vortexing properties.

    Compare
  • A collection of our most popular products.

    We know your time is precious, so we have collected a list of our most popular products to get you started.

  • Delivering safe, reliable products since 1955.

    We are proud of the products we make and are confident you will love them too.

  • News

    Find out whats going on at Caframo, events we will be attending and much much more.

  • Service & Support

    Find all the help you need for your Caframo Lab Solutions products.

  • Find a Distributor

    Discover where you can buy Caframo Lab Solutions products.