1-800-567-3556 ext. 248
1540 Crossover Mixer
  • 1540 Crossover Mixer
  • Crossover 1540 Dimensional
  • 1540 Drum Mount
  • Crossover 1540 Mounted on Drum
  • 1540 Stand Mount Full

Crossover

Model 1540

A powerful combination of torque and electronic sophistication. The robust ½ horsepower motor, PC/PLC communications and extensive features make the Caframo Crossover unparalleled in the market. Mixing up to 200 litres (55 gallons) of basic pre-mix, industrial pilot plant volumes, or full production batches, this portable mixer weighs only 12 kg (26.5 lb). The resistive touch screen enables simple feature operation (timers, alarms, rotation direction, resume on power up, start, stop) without removing your gloves! Control the mixer with a PC or PLC via USB, RS232 or 4‑20 mA or data log speed and torque directly to a memory stick.  Install immediately with standard 120 V cord set, and four bolt mounting. Optional plate or C‑clamp set attaches the Crossover to a stand, drum or customer mount and allows optimal shaft angle in vessel. Includes chuck, chuck key, chuck shaft guard, installed screen protector, USB memory stick, mounting bolts, power cord, manual, calibration certificate and three year warranty.

Order My 1540 Now!


Speed 50-1500 rpm
Volume Maximum 200 L (55 US Gallons)
Viscosity Maximum 180 000 mPa·s (180 000 cP)
Torque Maximum 3000 Ncm (264 in-lbs = 4248 in-oz)
Output Power 300 Watts (½ hp)
Speed Display Yes
Speed - Low Range 50-299 rpm
Speed - High Range 300-1500 rpm
Speed Accuracy Rolling average of 10 second period
Torque Display Yes
Zero Torque Yes
Timer Yes
Alarm Yes
Connectivity Ports Standard USB A, Mini USB B, DB9, 4-20 mA
Through Shaft Yes
Chuck Maximum Shaft Diameter 15.9 mm (⅝”)
Chuck and Shaft Guard Yes
Rotation Direction Clockwise and counterclockwise
Housing Flame Retardant Nylon 6
Weight 12 kg (26.5 lb)
Voltage 120 volt
Frequency 60 Hz
Ambient Temperature Operation 5-40°C (41-104°F)
Relative Humidity Operation 80%
Approvals CSA listed to Canada and US standards
Warranty 3 years
1540

Mixer 120 volts, 60 Hz. Includes chuck, chuck key, chuck shaft guard, installed screen protector, USB memory stick, four mounting bolts, grounded North American cord set, and manual (digital and printed).

  • Features
    • Resistive Touch Screen Display
    • Intuitive Speed Adjustment
    • Portable
    • 120 V cord set
    • Counter-clockwise rotation selection
    • Name Customization
    • Resume on Power up
    • Torque Zero feature
    • Cycle Timer
    • Run Time Display
    • Torque Min/Max Setting
    • Audible Alarm
    • PC/PLC connectivity
    • Multiple com ports
    • Data Logging
    • Sealed Housing
    • Quick Stop
    • Installed Screen Protector
    • Chuck Shaft Guard
    • Adjustable Keyed Chuck
    • Automatic Transmission
    • Brushless DC motor - fan cooled
    • Maintenance Free
  • Benefits
    • Operate while wearing PPE or sterility gloves
    • Precisely set desired speed or adjust on screen
    • Meet the changing needs of multiple facilities
    • Easy installation to North American grounded outlet
    • Improve mixing and impeller functionality
    • Assign an identifier name or number to each mixer
    • Optional auto-start operation upon power restoration
    • Monitor viscosity changes as they relate to torque
    • Set total mixing time; stop mixing or sound alarm
    • Track total mixing time from power up
    • Stop mixing or sound alarm at desired torque reading
    • Notification of desired time or torque level
    • Integrate into existing monitoring and control systems
    • Capability for RS232 RS485 PLC and Ethernet or PC
    • Document results: speed / torque / time / date
    • Protection in aggressive environments; wash down
    • Easily access button to immediately stop mixing
    • Protects display; replaceable if covered by splashes or dust
    • Guard spinning chuck and upper shaft for safety
    • Holds shaft securely; diameters up to 16 mm (⅝")
    • Shift gears without manually stopping mixer
    • High efficiency no maintenance motor
    • Always available – no required maintenance schedule
  • Crossover 1540 C-Clamp Set A128SET

    C-Clamp Set

    Model A128SET

    • Single bolt adjusts angle on two axes
    • Attaches directly to drum, frame, or a stand
    • Cast 304 electropolished stainless steel

     

    Mounts the Caframo Crossover mixer to any stable vertical plate including industrial stand, drum or vessel. Easy single bolt adjustment for multi-angle positioning.  Standard tool installation.

    Compare
  • Crossover 1540 Plate Mount A129

    Plate Mount

    Model A129

    • 260 x 100 mm (10” x 4”)
    • 6.4 mm (¼”) thickness
    • Electropolished 304 stainless steel

     

    Sturdy simple mounting solution.  Secure to existing horizontal surfaces, mixing equipment, drum brackets or industrial stands. Slotted bolt pattern provides wide flexibility.

    Compare
  • Crossover 1540 Screen protector S200

    Screen Protector

    Model S200

    • 61.5 x 110 mm (2.4” x 4.3”)
    • Self-adhesive
    • Resin-coated PET

     

    Protect resistive touch screen of Caframo Crossover from splashes or dust without reducing functionality.  Adhesive backing enables immediate installation and replacement.

    Compare
  • Crossover 1540 Stand A118

    Manual Heavy Duty Stand

    Model A118

    • Adjustable 99-145 cm (39”-57”) height
    • 102 x 102 cm (40” x 40”) caster footprint
    • Plate steel and square tubing construction

     

    Heavy duty stand for Caframo Crossover provides wide base stability and adjustable height. Comes with smooth rolling casters that swivel & lock into place.  Manual lift.  Base design accommodates drums up to 122 cm (48”) diameter.

    Compare
  • Crossover 1540 Chuck Shaft Guard CG6

    Chuck Shaft Guard

    Model CG6

    • Polycarbonate ABS
    • Simple bolt mounting
    • Safety accessory

     

    Quickly bolts in place to create a barrier around the moving chuck and shaft, and protects the chuck from splash.  Use with industrial mixer 1540.

    Compare
  • Crossover 1540 Chuck and Key A016SET

    Chuck Set

    Model A016SET

    • Shaft Ø up to 16 mm (⅝”)
    • Through shaft
    • 420 stainless steel

     

    Chuck and key for Caframo Crossover mixer.  Facilitates quick impeller changes or positioning.  Chuck key includes hex tool for output shaft installation and easy removal for cleaning.  Chuck shaft guard is available.

    Compare
  • 4" Propeller A354

    Propeller & Shaft

    Model A354

    • 102 mm (4”) Ø
    • 914 mm (36″) shaft
    • Axial flow

     

    Pitched propeller made of 316L stainless steel, polished and buffed to mirror finish.  13 mm (½”) diameter shaft is welded to hub. For pilot scale and small production volume mixing. Axial flow effective for low shear mixing.

    Compare
  • 6" Propeller A356

    Propeller & Shaft

    Model A356

    • 152 mm (6”) Ø
    • 914 mm (36″) shaft
    • Axial flow

     

    Pitched propeller of 316L stainless steel, polished and buffed to mirror finish.  13 mm (1/2″) diameter shaft is welded to hub. For pilot scale and small production volume mixing. Axial flow effective for low shear mixing.

    Compare
  • A016KEY

    Chuck Key Only

    Model A016KEY

    • 132 mm x 70 mm (5 3/16” x 2 ¾”)
    • Multipurpose tool
    • 420 stainless steel

     

    Chuck key from the A016SET. Includes hex tool for chuck installation and removal, which can also install chuck shaft guard.

    Compare

You may also like…

  • Crossover 1540 Stand A118

    Manual Heavy Duty Stand

    Model A118

    • Adjustable 99-145 cm (39”-57”) height
    • 102 x 102 cm (40” x 40”) caster footprint
    • Plate steel and square tubing construction

     

    Heavy duty stand for Caframo Crossover provides wide base stability and adjustable height. Comes with smooth rolling casters that swivel & lock into place.  Manual lift.  Base design accommodates drums up to 122 cm (48”) diameter.

    Compare
  • Crossover 1540 C-Clamp Set A128SET

    C-Clamp Set

    Model A128SET

    • Single bolt adjusts angle on two axes
    • Attaches directly to drum, frame, or a stand
    • Cast 304 electropolished stainless steel

     

    Mounts the Caframo Crossover mixer to any stable vertical plate including industrial stand, drum or vessel. Easy single bolt adjustment for multi-angle positioning.  Standard tool installation.

    Compare
  • 4" Propeller A354

    Propeller & Shaft

    Model A354

    • 102 mm (4”) Ø
    • 914 mm (36″) shaft
    • Axial flow

     

    Pitched propeller made of 316L stainless steel, polished and buffed to mirror finish.  13 mm (½”) diameter shaft is welded to hub. For pilot scale and small production volume mixing. Axial flow effective for low shear mixing.

    Compare
  • A collection of our most popular products.

    We know your time is precious, so we have collected a list of our most popular products to get you started.

  • Delivering safe, reliable products since 1955.

    We are proud of the products we make and are confident you will love them too.

  • News

    Find out whats going on at Caframo, events we will be attending and much much more.

  • Service & Support

    Find all the help you need for your Caframo Lab Solutions products.

  • Find a Distributor

    Discover where you can buy Caframo Lab Solutions products.